- 13 -
ARAB TEXT
PARSI TEXT
SOUTHEAST W/O TEXT
WEST EU W/O TEXT
EAST EU W/O TEXT
ARAB W/O TEXT
CHINA, INDIA W/O TEXT
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
ENGLISH
ARABIC
PARSI
ARAB ALL
RESERVED
RESERVED
RESERVED
RESERVED
The same ARAB TEXT
The same SOUTHEAST ASIA TEXT
The same WEST EU GREEK TEXT
The same EAST EU CYRILLIC TEXT
The same ARAB TEXT
ENGLISH
CHINA
HINDI
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
ENGLISH
FRENCH
ARAB
URDU
ENGLISH
FRENCH
ARAB
PARSI
ENGLISH
FRENCH
ARAB
URDU
PARSI
ENGLISH
CHINESE
ENGLISH
HINDI
0
1
2
3
0
1
2
3
0
1
2
3
4
0
1
0
1
3
4
5
6
7
8
9
10. How to inspect condition of a
transmission and reception in FM
TRANSMISSION MODEL
- FM TRANSMITTER’s efficiency inspections is executed to a
finished in a final inspection phase.
- FM TRANSMITTER is a function which receives voice-
signal by an exclusive remote control and Earphone, transmits
a FM through transmitter of inner part in MICOM BOARD to
TV sound(MONITOR OUTPUT)
1) Execute in channel generating voice-signal
2) Select a transmitted frequency in MENU OSD.
MENU => SOUND => TRANSMITTER => frequency
selection (87.7MHz)
3) A received frequency in an exclusive remote control or
received FM Radio is tuned by 87.7MHz(107.7MHz) which
is same as frequency in OSD.
4) Check out whether a signal generating to MAIN SPEAKER
generates in earphone or receiver or not.
5) There is no alternation and setting of adjusted DATA in the
process of inspecting FM TX.
11.OPTION Adjustment
1) This option adjustment decides function in accordance with
model. Press IN-START button at SVC mode, then adjust
the option at OPTION1,2,3,4,5 mode.
2) Mark the option adjustment data like [112,68,164,32,8] in
BOM.
* Mark of BOM
LEVEL PART NO. SPECIFICATION DESCRIPTION
1. 3141VMN382A MAIN CHASSIS ASSY [112,68,164,32,8]
In this model, the OPTION1 data is 112, OPTION2 data is 68, the
OPTION3 data is 164,the OPTION 4 data is 32, OPTION 5 data
is 8.
To Next Page
Loading...
Need help?
General
