LG 29SA1RL - No Picture;No Sound

- 15 -
4) No Picture/ No Sound
Is any OSD displayed?
OK
NO
NO
OK
OK
NO NO
OK
OK
NO
OK
OK
OK
P20A (R, G, B out of
IC501)
P20A (R, G, B out of
IC501)
Replace IC501
Check pin7, 8 SCL,
SDA
Check IC12(EEPROM)
& SCL, SDA, Line
Check pin3 Reset
Voltage
Check IC501 pin 83,
84, 85 (R, G, B out)
Check SMPS Trans
Secondary Voltage
Go to No sound/
picture OK
Check the waveform
pin73(H-out)
Check IC501 pin 83,
84, 85 (R, G, B out)
Check receiving system in MENU
& execute Auto - Program
Does the auto - Program
operate properly
Store on manual -program MENU
Copyright©2009 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only