- 14 -
* Adj. condition and cautionary items
1) Lighting condition in surrounding area
Surrounding lighting should be lower 10 lux. Try to
isolate adj. area into dark surrounding.
2) Probe location
- LCD: Color Analyzer (CA-210) probe should be
within 10cm and perpendicular of the module
surface (80°~ 100°)
3) Aging time
- After Aging Start, Keep the Power ON status during 5
Minutes.
- In case of LCD, Back-light on should be checked
using no signal or Full-white pattern.
(7) Reference (White Balance Adj. coordinate and color
temperature)
• Luminance: 216 Gray
• Standard color coordinate and temperature using CS-
1000
• Standard color coordinate and temperature using CA-
210(CH 14)
5.4. HDCP (High-Bandwidth Digital
Contents Protection) SETTING
- HDCP setting is not necessary in This Chassis.
5.5 Option selection per country
5.5.1 Overview
• Option selection is only done for models in Non-USA North
America due to rating
• Applied model: LA06A Chassis applied None USA
model(CANADA, MEXICO)
5.5.2 Method
1) Press ADJ key on the Adj. R/C, then select Country
Group Meun
2) Depending on destination, select KR or US, then on the
lower Country option, select US, CA, MX. Selection is
done using +, - KEY
5.6 Tool Option selection
• Method : Press Adj. key on the Adj. R/C, then select Tool
option.
5.7 hip-out mode check (In-stop)
• After final inspection, press In-Stop key of the Adj. R/C and
check that the unit goes to Stand-by mode.
• After final inspection, Always turn on the Mechanical S/W.
LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
Mode Color Coordination Temp ∆UV
xy
COOL 0.269 0.273 11000K 0.0000
MEDIUM 0.285 0.293 9300K 0.0000
WARM 0.313 0.329 6500K 0.0000
Mode Color Coordination Temp ∆UV
xy
COOL 0.269±0.002 0.273±0.002 13000K 0.0000
MEDIUM 0.285±0.002 0.293±0.002 9300K 0.0000
WARM 0.313+0.002 0.329±0.002 6500K 0.0000
Model Tool 1 Tool 2 Tool 3 Tool 4 Tool 5
32LD320H-UA 16864 8786 32772 2305 0
37LD320H-UA 20960 8786 32772 2305 0
42LD320H-UA 25056 8786 32772 2305 0
26LD320H-UA 12768 8786 32772 2305 0