LG 32LE5400 - Page 22

NETWORK
When a security code is already set
PIN (Personal Identification Number)
If you want to connect the AP (Access Point) or router with PIN, use this feature.
Selecling AP
Select AP you want to connect.
PllI·l/1
Inpullhe new SSIO
@Next
Connecting with PIN mode
Insert PIN number at the AP webpage and
press 'Connect' button.
r-r-'PIN }iUBMER: 1234567tl =;-~l
L_~~';"_~~--"-'-"'-....:... ,
Connect
, Repeat step 1-6 on P2l.
Connect the acccess point with PIN
mode.
3 You can see the Network 10 and Security Key
on your TV screen.
Enter the PIN number to your device.
@ Select Connect.
5 Repeat step 4-5 on P18_
III PIN number is the unique 8 digit number
of the dongle.
Simple setting (WPS-button mode)
If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it's available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSIO: Service Set Identifier) and security code of your access point or wireless router.
22
Selecllhe wireless network settIng tYpe ..
'" 'it ''';
Select the wireless network setting type.
Simple selling (WPS-but1on model
f' _S;;~~:~hri-;;~~ .:-=:]
@Next
, Repeat step 1-4 on P2l.
..
Simple seltlng(WPS-bultll~ mode) .
PreIS PBC Mode button of AP Ind press 'Connect' bunon,
Connect
.~ ,
k Cwtion:tMckifPetlftOd.bllttofti5.l.IijI\lllftJr~"P",
@lNext
4 Repeat step 4-5 on P.lS.