Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
- 15 -
5.2.1 Manual Download
A Write HDMI EDID data
• Using instruments
- Jig. (PC Serial to D-Sub connection) for PC, DDC
adjustment.
- S/W for DDC recording (EDID data write and read)
- D-sub jack
- Additional HDMI cable connection Jig.
• Preparing and setting.
- Set instruments and Jig. Like pic.5), then turn on PC and
Jig.
- Operate DDC write S/W (EDID write & read)
- It will operate in the DOS mode.
Pic.3) For write EDID data, setting Jig and another instruments.
• EDID data for LJ03B/D/E/R Chassis (Model name = LG TV)
- HDMI-1 EDID table (0x04, 0x5A)
- HDMI-2 EDID table (0x04, 0x4A)
- HDMI-3 EDID table (0x04, 0x3A)
- HDMI-4 EDID table (0x04, 0x2A)
- Analog (RGB) EDID table (0x1D)
See Working Guide if you want more information about EDID
communication.
To Next Page
Loading...
