LG 37LC3R - Page 68

66
APPENDIX
APPENDIX
2222.. AAbbnnoorrmmaall SSttaattee ((CCoommmmaanndd22::zz))
To recognize an abnormal state.
Data FF: Read
Data 0: Normal (Power on and signal exist)
Data 1: No signal (Power on)
Data 2: Turn the TV off by remote control
Data 3: Turn the TV off by sleep time function
Data 4: Turn the TV off by RS-232C function
Data 5: 5V down
Data 6: AC down
Data 7: Turn the TV off by Fan Alarm function (option)
Data 8: Turn the TV off by Off time function
Data 9: Turn the TV off by Auto sleep function
Data a: Turn the TV off by AV borad detect
* This function is “read only”.
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Acknowledgement [z][ ][Set ID][ ][OK][Data][x]
2266 .. AAuuttoo CCoonnffiigguurree ((CCoommmmaanndd11::jj,, CCoommmmaanndd22::uu))
To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Data 1: To set
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
MSB LSB
0 0 0 0 0 0 0 0
External Input
Data
0001
Analog
0010
AV
0100
Component
0101
RGB-DTV
0110
RGB-PC
1001
HDMI
External Input Input Number
Acknowledgement [b][ ][Set ID][ ][OK][Data][x]
2255.. KKeeyy ((CCoommmmaanndd11::mm,, CCoommmmaanndd22::cc))
To send IR remote key code.
Data: Key code - Refer to page 69.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
2244.. CChhaannnneell AAdddd//DDeell ((CCoommmmaanndd11::mm,, CCoommmmaanndd22::bb))
To add and delete the channels
Data 0: Delete Data 1: Add
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Acknowledgement [b][ ][Set ID][ ][OK][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK][Data0][Data1]
[Data2][Data3][Data4][Data5][x][a][ ]
[Set ID][ ][NG][Data0][x]
2277.. IInnppuutt sseelleecctt ((CCoommmmaanndd11::xx,, CCoommmmaanndd22::bb))
((MMaaiinn PPiiccttuurree IInnppuutt))
To select input source for TV.
Data: Structure
Transmission [x][b][ ][Set ID][ ][Data][Cr]
2233 .. CChhaannnneell TTuunniinngg ((CCoommmmaanndd11::mm,, CCoommmmaanndd22::aa))
Tune channel to following physical number.
Data 0: NTSC air : 02 ~ 45
NTSC cable : 01, 0E ~ 7D
Data 1 ~ 4: Don’t care
Data 5: Attribute
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ]
[Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Input Number Data
0000
Input1
00
11
Input4
00
1
0
Input3
000
1
Input2
2211.. BBlluuee AAddjjuussttmmeenntt ((CCoommmmaanndd22::$$))
To adjust red in color temperature.
Data Min: 0 ~ Max: 50
Refer to ‘Real data mapping 2’. See page 67.
Transmission [k][$][ ][Set ID][ ][Data][Cr]
Acknowledgement [$][ ][Set ID][ ][OK][Data][x]
Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals