LG 42LB1DR - Page 136

APPENDIX
C
:
)
To
adjust
the screen tint.
You can also
adjust
tint in the Video menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
DataRed:0~Green:64
*Refer to 'Real data
mapping
1'. See
page
134.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
C
:
)
To
adjust
the screen
sharpness.
You can also
adjust sharpness
in the Video menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0
~
Max: 64
*Refer to 'Real data
mapping
1'. See
page
134.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
O C
:
)
To select OSD
(On
Screen
Display)
on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off Data 1: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
C C
:
)
To lock the remote control and the front
panel
controls
on the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off Data 1: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If
you're
not
using
the remote control and front
panel
controls on the
TV,
use this mode. When main
power
is
on/off,
remote control lock is released.
O C
:
)
To control the PIP
(Picture-in-Picture)/POP/Twin
pic-
ture. You can also control the
PIP/POP/Twin
picture
using
the PIP button on the remote control.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0:Off 2: DW1
1: PIP 5:
POP4(POP Scan)
Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x]
C
:
)
To select sub
picture position
for PIP.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0:
Right
down on screen
Data 1: Left down on screen
Data 2: Left
up
on screen
Data 3:
Right up
on screen
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
C
:
)
To
adjust
treble.
You can also
adjust
treble in the Audio menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0
~
Max:
64(*transmit
by
Hexadecimal
code)
*Refer to 'Real data
mapping
1'. See
page
134.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
C
:
)
To
adjust
bass.
You can also
adjust
bass in the Audio menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0
~
Max:
64(*transmit
by
Hexadecimal
code)
*Refer to 'Real data
mapping
1'. See
page
134.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
C
:
)
To
adjust
balance.
You can also
adjust
balance in the Audio menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0
~
Max:
64(*transmit
by
Hexadecimal
code)
*Refer to 'Real data
mapping
1'. See
page
134.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
C C
:
)
To
adjust
color
temperature.
You can also
adjust
color
temperature
in the Video
menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm 3: User
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
C
:
)
To
adjust
red in color
temperature
Transmission
[k][v][ ][Set ID][][Data][Cr]
Data Min:0
~
Max:C8
*Refer to "Real data
mapping
2". See
page
136.
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
135
U0512Een-03
98/2/7
3:56 AM
Page
135