11
STAND INSTRUCTIONS
(For 32LD350, 32/37/42/47LD460, 37/42LD461C, 32/37/42/47LD465, 32/42LD460H)
ꔛ
Image shown may differ from your TV.
NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened
(If not tightened fully, the TV can tilt for-
ward after the product installation). Do
not over tighten.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
3
Assemble the TV as shown.
4
Fix the 4 screws securely using the holes in
the back of the TV.
INSTALLATION
STAND BASE
STAND BODY
M4 x 20
M4 x 20
DETACHMENT
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV
until you hear it click.
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
2
Remove the screws that hold the stand
on.
3
Detach the stand from TV.
To Next Page
Loading...
