LG 42LH35FD - Page 14

- 14 -
LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
O Manual Download
• Write HDMI EDID data
- Using instruments
=> Jig. (PC Serial to D-Sub connection) for PC, DDC
adjustment.
=> S/W for DDC recording (EDID data write and
read)
=> D-sub jack
=> Additional HDMI cable connection Jig.
- Preparing and setting.
=> Set instruments and Jig. Like pic.5), then turn on
PC and Jig.
=> Operate DDC write S/W (EDID write & read)
=> It will operate in the DOS mode.
Pic.3) For write EDID data, setting Jig and another instruments.
• EDID data for LJ91D Chassis (Model name = LG TV)
- HDMI-1 EDID table (0x3D, 0x2C)
- HDM2 EDID table (0x3D, 0x1C)
- HDMI-3 EDID table (0x3D, 0x0C)
- Analog (RGB) EDID table (0xA5, 0x25)
PC
Download jig
RGB cable
Main
B/D
Edid data and Model option download (RS232)
NO Item CMD 1 CMD 2 Data 0
Enter
download MODE
Download
Mode In
A E 0 0
When transfer the ’Mode In’ ,
Carry the command.
Edid data and
Model option
download
Download
A E *Note1 *Note2
Automatically download
(The use of a internal Data)
Adjust Mode Out
A E 9 0
Adjustment
Confirmation
A E 9 9
To check Download
on Assembly line.