PREPARATION
23
42/47/55LH90**
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the
back of the TV.
1
2
3
INSTALLATION (
Except 55LH90**)
GG
When assembling the desk type stand, make sure
the bolt is fully tightened (If not tightened fully,
the TV can tilt forward after the product installa-
tion). Do not over tighten.
NOTE
DETACHMENT
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
Loose the bolts from TV.
2
Detach the stand from TV.
3
PROTECTION COVER
Insert the
PPRROOTTEECCTTIIOONN CCOOVVEERR
into the TV.
After removing the protection paper from the
protection cover, adhere it to the TV as shown.
4
MFL59166615-Edit1-en 12/2/09 3:38 PM Page 23
To Next Page
Loading...
