(5) Exchange the bootloader.bat file.
4. S/W Program Download
4-1. Download Method 1 (PCB Ass’y)
(1) Connect the download jig to D-sub jack.
(2) Execute ‘Download.vi2c’ program in PC, then a main
window will be opened.
(3) Double click the blue box and confirm “Bootloader Version”
as 40.
(4) Click the “Erase Flash” button.
G Select the “bootloader.bat” file.(install>VCTP_download>
bootloader)
G Push “OK”
G Finish the program, after saving the file “download_cs.vi2c”.
(if you click , the massage appears automatically)
- 13 -
To Next Page
Loading...
