- 16 -
(11) Under Downloading progress.
(12) If download is failed, for example “No acknowledge from
slave”, execute download again from (1).
4-3. Download Method 3 (SET)
(1) Push the “Tilt” button in an Adjust Remocon Then the PDP
will change a “slave mode”.
(2) Connect Zig to TV using a D-sub cable.
(3) `Execute ‘Download_CS.vi2c’ program in PC, then a main
widow will be opened.
(4) Click “GO” button.
If you don’t push the “go”, the Hex file would not be
downloaded although the download proceeds normally at first
glance.
(5) Double click the blue box and confirm “Bootloader Version” as
40.
(6) Click the “Erase Flash” button.
To Next Page
Loading...
