To Next PageTo Next Page
Need help?Do you have a question about the LG 42PJ250 and is the answer not in the manual?
General| Depth | 55.3 mm |
|---|---|
| Height | 617.8 mm |
| Weight | 20100 g |
| Pixel pitch | - mm |
| Product color | Black |
| RMS rated power | 10 W |
| Display diagonal | 42 \ |
| Depth (with stand) | 260 mm |
| Display brightness | 1500 cd/m² |
| Display resolution | 1024 x 768 pixels |
| Display technology | Plasma |
| Power requirements | 100 - 240V, 50/60Hz |
| Width (with stand) | 988 mm |
| Height (with stand) | 688.5 mm |
| High frequency rate | 600 Hz |
| Weight (with stand) | 21600 g |
| USB 2.0 ports quantity | 1 |
| Contrast ratio (dynamic) | 3000000:1 |
| Annual energy consumption | 189.65 kWh |
| Power consumption (standby) | 0.1 W |
General advice for safe servicing procedures and handling.
Procedure to check AC leakage current under hot operating conditions.
Procedure to check AC leakage current under cold operating conditions.
Specifies the models and chassis this manual applies to.
Lists general operating and environmental specifications.
Outlines performance and safety test standards used.
Defines chromaticity coordinates for white, red, green, and blue.
Measures color consistency across the screen.
Specifies chromaticity for Cool, Medium, and Warm settings.
Measures brightness consistency across the screen.
Details supported broadcast systems and channel ranges.
Lists power requirements and available screen sizes.
Defines display aspect ratio and tuning method.
Information on PDP module types and operating/storage conditions.
Lists resolutions and frequencies for component video input.
Lists resolutions and frequencies for RGB PC input.
Lists resolutions and frequencies for HDMI PC/DTV input.
Specifies applicable models and general adjustment conditions.
Details the process for adjusting the PCB after assembly.
Procedures for Analog-to-Digital Converter (ADC) calibration.
Verifies the correct writing of DDC EDID data.
Guidelines for assembly line processes and power PCB adjustment.
Steps for writing DDC EDID data via DFT or Remocon.
Test equipment and standards for white balance calibration.
How to connect measurement tools for white balance.
Step-by-step guide for manual white balance adjustment.
Notes on HDCP key saving in external EEPROM.
Checks RS-232C communication after Baud Rate adjustment.
Procedures for setting tool options via DFT or manual.
Procedures for setting area options via DFT or manual.
Flowchart for diagnosing and resolving power-up boot failures.
Diagnostic steps for issues where the On-Screen Display is not visible.
Steps to troubleshoot issues related to module control signals.
Diagnostic steps for video problems with digital TV signals.
Diagnostic steps for video problems with analog TV signals.
Diagnostic steps for video issues with component input signals.
Diagnostic steps for video issues with RGB input signals.
Diagnostic steps for video issues with AV input signals.
Diagnostic steps for video issues with HDMI input signals.
Steps to diagnose audio problems across all input sources.
Diagnostic steps for audio problems with digital TV signals.
Diagnostic steps for audio problems with analog TV signals.
Audio troubleshooting for Component, RGB, and AV inputs.
Diagnostic steps for audio problems with HDMI input signals.
Steps to diagnose issues with the optical audio output.
Diagnostic steps for problems related to USB connectivity.
Visual representation of the TV's main functional blocks and connections.
Diagram showing the physical assembly of the TV unit's components.
