[2] SOFTWARE UPGRADE PROCEDURE
Step 1: Ready for F/W Upgrade
1.1 Prepare a FAT 32 format USB memory .
1.2 Copy the software(*.bin file) to USB flash disk(root directory).
Step 2: F/W Upgrade
2.1 Plug the USB memory on the USB port.
2.2 Automatically detecting update file in USB Stick
2.3 Press YES, Updating is starting.
2.4 Updating Completed, TV will reboot automatically. Press “Settings+1999+Q.VIEW”
on the remote to enter in factory mode to check your updated version.
- 9 -
To Next Page
Loading...
