Need help?Do you have a question about the LG 43UH610 Series and is the answer not in the manual?
General| Screen Size | 43 inches |
|---|---|
| Resolution | 3840 x 2160 (4K UHD) |
| Display Type | LED |
| Smart TV | Yes (webOS 3.0) |
| Audio Output | 20W |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Bluetooth | No |
| Refresh Rate | 60Hz |
| Operating System | webOS 3.0 |
| HDR Support | Yes |
| Weight | 20.7 lbs |
Provides general safety advice for servicing electronic equipment.
Method for checking AC leakage current with the chassis cold.
Method for checking AC leakage current with the chassis hot.
General guidelines and precautions for servicing electronic equipment.
Procedures to prevent damage to sensitive electronic components.
Best practices and techniques for soldering electronic components.
Defines the scope of application for the specifications provided.
Specifies the environmental and power conditions for testing.
Outlines the methods and standards used for performance testing.
Details the general electrical and functional specifications of the TV.
Lists supported resolutions and frequencies for component input.
Details supported resolutions and frequencies for HDMI inputs.
Supported 3D input modes and resolutions via HDMI 1.4b.
Supported 3D input modes and resolutions via HDMI 1.4/2.0.
Supported 3D input modes and resolutions for PC input via HDMI.
Specifies the models and chassis covered by the adjustment instructions.
Lists general specifications and conditions for adjustment procedures.
Lists the specific adjustment procedures to be performed.
Details the automatic adjustment process, including ADC adjustment.
Procedures for downloading MAC, ESN, Widevine, and HDCP2.0 keys.
Guidelines and methods for inspecting LAN connectivity and settings.
Information regarding ADC adjustment and its necessity.
Instructions for downloading EDID/DDC data for display identification.
Lists the commands and protocols for camera port inspection.
Details the procedure for adjusting V-COM voltage deviation in panels.
Explains the objective and working principle of white balance adjustment.
Lists the necessary equipment for performing white balance adjustments.
Provides the command format and RS-232C commands for adjustment.
Describes the preparation and method for GND and internal pressure checks.
Specifies the voltage, time, and points for checks.
Instructions for downloading software updates via USB.
Details the procedure for checking audio output levels and quality.
Illustrates the overall circuit connectivity of the K2Lp chipset.
Shows the I2C communication pathways within the K2Lp chipset.
Details the power distribution and voltage requirements for the K2Lp.
Illustrates the block diagram for the tuner and CI interface.
Shows the block diagram for video and audio input signals.
Illustrates the audio output signal paths and components.
Details the HDMI interface connections and signals.
Shows the block diagram for USB, WIFI, and UART interfaces.
Provides a visual breakdown of the TV's components and their assembly.
Step-by-step instructions for removing the back cover.
Specifies the dimensions of back cover holes and tool requirements.
Troubleshooting steps for no video or normal audio issues.
Troubleshooting steps for no video and no audio issues.
Troubleshooting steps for picture breaking or freezing issues.
Troubleshooting steps for color-related video errors.
Troubleshooting for vertical/horizontal bars, residual images, or light spots.
Troubleshooting steps for the TV not powering on.
Troubleshooting for issues related to unexpected power-offs.
Troubleshooting steps for no audio when video is normal.
Troubleshooting for audio distortion, disconnection, or noise.
Troubleshooting for remote control or local switch malfunctions.
Troubleshooting steps for the MR15 (Magic Remote) operation.
Troubleshooting steps for Wi-Fi connectivity issues.
Troubleshooting steps for camera operation errors.
Troubleshooting for errors related to external device recognition.
Troubleshooting steps for circuit or mechanical noise issues.
Troubleshooting steps for physical defects on the exterior of the TV.
Checking LCD backlight for no video/normal audio issues.
Checking tuner input signal strength for video issues.
Checking link cable connection for color error issues.
Checking the front power indicator for no power issues.
Checking power off modes for power issues.
Checking menu settings for no audio/normal video.
Checking the remote control operation and IR cable condition.
To Next Page
