10
ASSEMBLING
AND
PREPARING
oNOTE
• The items supplied
with
your product may vary depending
on
the model.
• Product specifications or contents of this manual may
be
changed without prior notice due
to
upgrade of product functions.
•
(I;;)
How
to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference
in
the
PC
audio cable.
Wind the
PC
audio cable
on
the ferrite core thrice. Place the ferrite core close to the
TV.
,_
~.(+1-5mm)
[to
an
External device)
~""Im",IjJn--.----------((~
[Figure
11
ItotheTVI
(0)
[Cross Section of
Ferrite Core)
2 Use the ferrite core to reduce the electromagnetic interference
in
the power cable.
Wind the power cable
on
the ferrite core once.
Place
the ferrite core close to the
TV.
[to a wall plug)
~((==~
[totheTVI@
[Figure
2)
I
[Cross Section of
Ferrite Corel
3 Use the ferrite core
to
reduce the electromagnetic interference
in
the power cable.
Wind the power cable
on
the ferrite core once. Place the ferrite core close to the
TV
and
a wall
plug.
[to a wall plug)
~((====~
Ito the
TVI@
[Figure
31
[Cross Section of
Ferrite Corel
- If there
is
one ferrite core, follow
as
shown
in
Figure
1.
- If there
are
two
ferrite cores, follow
as
shown
in
Figures 1 and
2.
- If there
are
three ferrite cores, follow
as
shown
in
Figures 1
and
3.
• (
..
)
For
an
optimal connection, HDMI cables
and
USB
devices should have bezels less than
10
mm
(0.39 inches) thick
and
18
mm
(0.7 inches) width.
*A
<
10
mm
(0.39
inches)
*8
<
18
mm
(0.7
inches)
To Next Page
Loading...
