LGE Internal Use OnlyCopyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
4. Electrical specification
- Module General Specification
1. Application range
This specification is applied to the LED LCD TV used LD91L
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100-240V@
50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC:CE, IEC
No Item Specification Remark
1 Screen Device 47” wide color display module
2 Aspect Ratio 16:9
3 LCD Module 47” TFT LCD FHD 200Hz
4 Operating Environment Temp. : 0 ~ 50 deg
Humidity : 10 ~ 90%
4 Storage Environment Temp. : -20 ~ 60 deg
Humidity : 10 ~ 90 %
5 Input Voltage AC100-240V~, 50/60Hz
6 Power Consumption Power on (White) LCD (Module) + Backlight(LED)
Typ : 183
7 Module Size 1083.6 (H) x 628.8 (V) x 25.5mm (D) With inverter
8 Pixel Pitch 0.5415 (H) x 0.5415 (D)
9 Back Light LED
10 Display Colors 1.06Billion colors (10 bit)
11 Coating 3H(Hard coating)
To Next Page
Loading...
