LG 49LF51 series - Page 18

[P
ENGLISH
Q
Connect the TV’s HDMI IN
!   
C
IM+wINK 
0
!
¥(
DMI
output terminal using an HDMI cable.
t[Depending on model]
For home theatre units with a SIMPLINK function, connect HDMI
terminals as above, and use an optical cable to connect Optical
Digital Audio Out from the TV to Optical Digital Audio In of the
SIMPLINK device.
2 Select INPUT(OPTION) SIMPLINK
)
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK function to ON
)
4 In SIMPLINK menu window, selects the device you want to control.
tThis function is only compatible with devices with the SIMPLINK
logo.
tTo use the SIMPLINK function, you need to use a high-speed HDMI®
cable (with CEC (Consumer Electronics Control) feature added).
High-speed HDMI® cables have the No. 13 pin connected for
information exchange between devices.
tIf you switch to another input, the SIMPLINK device will stop.
tIf a third-party device with the HDMI-CEC function is also used, the
SIMPLINK device may not work normally.
t[Depending on model]
If you select or play media from a the device with a home theatre
function, the HT Speaker(Speaker)
!
(

%

omatically connected.
Be sure to connect with an optical cable (sold separately) to use the
HT Speaker(Speaker)
"
%

tion.
SIMPLINK function description
t
Direct Play

+
ys the multimedia device on the TV instantly.
tSelect multimedia device
 C
elects the desired device via the
SIMPLINK menu to control it from the TV screen instantly.
t
Disc playback

M$
(
 
%
!! 
0
!
e with the TV
remote control.
tPower off all devices

When you power o the TV, all connected
devices are turned o.
t
Sync Power on

When the equipment with SIMPLINK function
connected HDMI terminal starts to play, the TV will automatically
turn on.
t
Speaker
 
D
epending on model]
Select speaker either on the home theatre unit or the TV.
To set password
SETTINGS LOCK Set Password
C

(
 $
(
   
((
#
)
The initial password is set to ‘0000’.
tWhen France is selected for Country, password is not ‘0000’ but
‘1234’.
tWhen France is selected for Country, password cannot be set to
‘0000’.
To return Factory Reset
SETTINGS OPTION Factory Reset
,

(
 !"! !
(
    
(
!$
(
 
(

)
The TV turns itself o and back on, and all settings are reset.
tWhen
Lock System
!
(
! 
e, a pop-up window appears and asks
for password.
tDo not turn o the power during initialization.
To remove the USB device
Q.MENU USB Device
C
  U
CB (
$ 
0
! 
*

%
#  
0

)
When you see a message that the USB device has been removed,
separate the device from the TV.
tOnce a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
Using a USB storage device - warning
tIf the USB storage device has a built-in auto recognition program
or uses its own driver, it may not work.
tSome USB storage devices may not work or may work incorrectly.
tUse only USB storage devices formatted with the Windows FAT32
or NTFS File System.
tFor external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 500 mA.
tIt is recommended that you use USB memory sticks of 32 GB or less
and USB HDDs of 2 TB or less.