- 6 -
LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
1. Application range
This spec sheet is applied all of the LED TV with LJ55A
chassis
2. Test condition
Each part is tested as below without special notice.
1) Temperature : 25 ºC ± 5 ºC, CST : 40 ºC±5 ºC
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage
Standard input voltage (100~240V@ 50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC: CE, IEC
4. Electrical Specification
No Item Specication Measurement Result Remark
1 Receiving System 1) SBTVD / NTSC / PAL-M / PAL-N
2 Available Channel 1) VHF : 02~13
2) UHF : 14~69
3) CATV : 01~135
3 Input Voltage 1) AC 100 ~ 240V 50/60Hz
4 Market Central and South AMERICA
5 Aspect Ratio 16:9
6 Tuning System FS
7 Operating Environment 1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
8 Storage Environment 1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
To Next Page
Loading...
