LG 49LF510V - Page 14

\6
ENGLISH
¡¢ £

dule connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
tCheck if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
tIf the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
Euro Scart connection
(Depending on model)
Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable.
¤¥¦§¥¦
Type
Current
input mode
AV1
(TV Out
1
)
Digital TV Digital TV
Analogue TV, AV
Analogue TVComponent
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
tAny Euro scart cable used must be signal shielded.
tWhen watching digital TV in 3D imaging mode, only 2D out signals
can be output through the SCART cable. (Only 3D models)
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
Network connection
(Only LAN PORT model)
Image shown may dier from your TV.
Wired network connection
Internet connection
Wired router
¨©ª«¬ ®¨©©¯°±
1 Press the SETTINGS
&%

on to access the main menu.
2 Select the NETWORK Network Setting

%
.
²³´
WORK
Network Setting
Move OK
Network Status

Select the Start Connection
)
µ¶··¸¹» ¼ ½
AN cable to the back of TV.
Setting your network will enable network-related features on the TV.
Previous
²¾¿ÀÁÂà ľ¿¿ÅÆÇ
Start Connection
Next

The device automatically tries to connect to the network.
Previous
ÈÉÊ
work connecting...
Network Setting
Cancel

The connected network is displayed.
Select the Complete
  9  #. !
)
²¾¿ÀÁÂà ľ¿¿ÅÆÇ
For detailed settings, select [Set Expert].
Previous
ËÌÍ
ed network is connected.
CompleteSet Expert