ENGLISH
\X
SIMPLINK function description
tDirect Play
Ð
+
ys the multimedia device on the TV instantly.
tSelect multimedia device
Ð C
elects the desired device via the
SIMPLINK menu to control it from the TV screen instantly.
tDisc playback
Ð
M$
(
%
!!
0
!
e with the TV
remote control.
tPower off all devices
Ð
When you power o the TV, all connected
devices are turned o.
t
Sync Power on
Ð
When the equipment with SIMPLINK function
connected HDMI terminal starts to play, the TV will automatically
turn on.
tSpeaker
Ð
[D
epending on model]
Select speaker either on the home theatre unit or the TV.
To set password
SETTINGS LOCK Set Password
C
(
$
(
((
#
)
The initial password is set to ‘0000’.
tWhen France is selected for Country, password is not ‘0000’ but
‘1234’.
tWhen France is selected for Country, password cannot be set to
‘0000’.
To return Factory Reset
SETTINGS OPTION Factory Reset
,
(
!"! !
(
(
!$
(
(
)
The TV turns itself o and back on, and all settings are reset.
tWhen Lock System
!
(
!
e, a pop-up window appears and asks
for password.
tDo not turn o the power during initialization.
To remove the USB device
Q.MENU USB Device
C
U
CB (
$
0
!
*
%
#
0
)
When you see a message that the USB device has been removed,
separate the device from the TV.
tOnce a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
Using a USB storage device - warning
tIf the USB storage device has a built-in auto recognition program or
uses its own driver, it may not work.
tSome USB storage devices may not work or may work incorrectly.
tUse only USB storage devices formatted with the Windows FAT32 or
NTFS File System.
tFor external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less than
500 mA.
tIt is recommended that you use USB memory sticks of 32 GB or less
and USB HDDs of 2 TB or less.
tIf a USB HDD with power-saving function does not work properly,
turn the power o and on. For more information, refer to the user
manual of the USB HDD.
tData in the USB storage device can be damaged, so be sure to back
up important les to other devices. Data maintenance is the user’s
responsibility and the manufacturer is not responsible for data loss.
My Media supporting le
tMaximum data transfer rate : 20 Mbps (Mega bit per second)
tExternal supported subtitle formats : *.srt (SubRip), *.smi (SAMI),
*.sub (SubViewer, MicroDVD, DVDsubtitleSystem, SubIdx(Vobsub)),
*.ass/*.ssa (SubStation Alpha), *.txt (TMplayer), *.psb (PowerDivX)
tInternal supported subtitle formats: *.dat/*.mpg/*.mpeg/*.
vob (DVD Subtitle), *.ts/*.tp/*.m2ts/ (DVB Subtitle), *.mp4 (DVD
Subtitle, UTF-8 Plain Text), *.mkv (ASS, SSA, UTF-8 Plain Text,
Universal Subtitle Format, VobSub, DVD Subtitle), *.divx/*.avi
(XSUB
1
, XSUB+)
1 XSUB : Supports internal subtitles generated from DivX6
Supported Video Formats
tMaximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p)
t.asf, .wmv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC, VC1(WMV3, WVC1), MP43
[Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3, MP3, 3D WMV
Single Stream.
tdivx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I, MPEG-1 Layer II,
Dolby Digital, MPEG-1 Layer III (MP3), *DTS
t.ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC, *DTS
t.vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG- 1 Layer II, DVD-LPCM
t.mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XVID, H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3), *DTS
t.mkv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XVID, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), *DTS, LPCM
tmotion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
t.mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, LPCM