- 4 -
LGE Internal Use OnlyCopyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATIONS
NOTE : Specifications and others are subject to change without notice for improvement
.
V Application Range
This spec is applied to PDP TV used PP01A Chassis.
V Specification
Each part is tested as below without special appointment.
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
V Test Method
1) Performance : LGE TV test method followed.
2) Demanded other specification
Safety : CE, IEC specification
EMC : CE, IEC
V Module Specification
(1) 50” WXGA
50PJ350R-TA NON-EU LG
Model Name Market Brand
Model Name
50PJ350R-TA
Remark
Safety : IEC/ EN60065, EMI : CISPR13
Market
NON-EU
Appliance
TEST
Display Screen Device
Aspect Ratio
PDP Module
Operating Environment
Storage Environment
Input Voltage
1
2
3
4
5
6
No Item Specification Remark
50 inch 16: 9 Color Plasma Display Module
16:9
PDP50T1###,
RGB Closed(Well) Type
1) Temp. : 0 ~ 55deg
2) Humidity : 20 ~ 80%
3) Temp. : -10 ~ 60deg
4) Humidity : 10 ~ 90%
AC100-240V, 50/60Hz
PDP
Glass Filter
LGE SPEC.
Maker : LGIT
To Next Page
Loading...
Need help?
General
