Checking order
1, 2. Check Touch cable condition between Touch & Main board.
3. Check the st-by 3.5V on the terminal 4,7.
4. When checking the Pre-Amp when the power is in ON condition, it is normal when the
Analog Tester needle moves slowly, and defective when it does not move at all.
Standard Repair Process Detail Technical Manual
Remote controller operation checking method
D. Function error
A22
Established
date
Revised
date
Error
symptom
Content
LCD TV
A22
①
②
③
Copyright © 2015 LG Electronics Inc. All rights reserved.
Only for training and service purposes
To Next Page
Loading...
