LG 55EG9100 - Mounting on a Table; Positioning and Connecting TV; Heat Source Caution

ENGENGLISH
17
ASSEMBLING AND PREPARING
3
4 EA
M4 x L20
4
Stand Cover
1
Insert the protruding parts of the stand cover
into the holes.
2
Insert the cover holder of the stand cover into
the holes until it clicks.
3
Press the stand cover gently so that the non-
woven fabric inside is attached tightly.
Mounting on a Table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
2
Connect the power cord to a wall outlet.
y
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
Cover Holder