ASSEMBLINGANDPREPARING19
(Dependinguponmodel)
_ o a_
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of theTV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of theTV.
Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable.
Make sure to keep the rope parallel to the flat
surface.
[_ CAUTION
Make sure that children do not climb on or J
hang on theTV.
Tidying Cables
Gather and bind the cables with the cable holder.
Cable Holder
,/_'_CAUTION
Do not move theTV by holding the cable
holder and cable management, as the cable
holders may break, and injuries and damage
to theTV may occur.
Ii NOTE
Use a platform or cabinet that is strong and
large enough to support theTV securely.
Brackets, bolts, and ropes are optional. You
can obtain additional accessories from your
local dealer.
To Next Page
Loading...
