32 MAGICREMOTEFUNCTIONS/USINGTHEUSERGUIDE
Registering Magic Remote
To use the Magic Rem0te, first pair it with
and backon,
Pressthe_ iBAcK
" ! the same time, for five seconds, to unpair I
(BACK} I the Magic Remote with yourTV. " I
4"..._ J_>Press_ogandho_d_ogtheKIT_ooI
will tet you Cancel and reLregister Magic
(H_e, .[ Remoteatonce. ndre-registerMagic ]
How to Use Magic Remote
Shake the Magic Remote slightly tO
th e right and left Or press _ (heine)]
__ (INPUT}, _D buttons to make the
pointer appear On the screen. (!n some
TV models, the pointer wi!l appear
when you _urn the Whee! button.)
If the pointer has not been used for a
certain period of_ime or Magic Remote
is placed on a flat surface, then th e
pointer wi!l disappear.
!fthe pointer does not move as you
wish, shake Magic Remote to the left
and right. The pointer will move t0 the
center ofthe screen.
, The Magic Remote depletes batteries
faster than a normal remote due tothe
additional features.
Precautions to Take
Use the remote control within the specified
range (within 10 m or 32.8 ft.) You may experience
communication failures when using the device outside
the coverage area or if there are obstacles within the
coverage area.
You may experience communication failures depending
on the accessories. Devices such as a microwave oven
and wireless LAN operate in the same frequency
band (2.4 GHz) as the Magic Remote. This may ca use
communication failures.
The Magic Remote may not work properly ifa wireless
router (AP) is within 1 meter (3.28 ft) of the TV. Your
wireless router should be more than
1 m (3.28 ft.) away from the TV.
Do not disassemble or heat the battery.
Do not drop the battery. Avoid extreme shocks to the
battery.
Inserting the battery in the wrong way may result in
explosion.
USING THE USER GUIDE
User Guide allows you to easily access detailed TV
information.
1 Press _ (Home) button to access the Home
menu.
2 Select User Guide and press the (]J) Wheel (OK)
button.
To Next Page
Loading...
