25
ENGENGLISH
ASSEMBLING AND PREPARING
3
M4 x L14
8 EA
4
Stand Cover
CAUTION
y
Insert the protruding parts of the Stand
Cover into the holes.
5
Cover Holder
Stand
Cover
CAUTION
y
Insert the Cover holder of the Stand Cover
into the holes until it clicks.
CAUTION
y
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
y
Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
y
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
To Next Page
Loading...
