ENGENGLISH
27
INSTALLATION MENU
No Signal Image
-
Set to On or Off.
-
It is a mode to decide whether to use no signal image when there is no signal.
External Speaker
Volume Control
-
Selects the volume control method of an external speaker.
You can select ‘Off’, ‘Int Variable’,’ Fixed.’,’Ext Variable’ by ^ pressing button.
Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 1 Watts.
Int variable is linked to the main volume OSD and change the volume 0 - 1 Watts.
Fixed produces a fixed output. The default is Off.
Output
-
This item is enabled when Volume Control is set to Fixed. You can choose one of 7 steps.(0.01/0.03/0.05/0.1/0.2/0.5/1
Watts). The Default is 1 Watt.
Set ID Setup
Set ID Lock
-
Set the ‘Set ID’ item in ‘GENERAL’ Menu whether to activate or not.
-
Set to On(Work) or Off(Do Not Work).
Set ID
-
Set the ‘Set ID’ of TV Set with 1~99.
To Next Page
Loading...
