LG 55LE5400 - Page 18

NETWORK
Wired Network Setup
Re~tting
@ Next
Previous setting value exists. Do
you want to connect with the
previous setting?
Appeared when wired and
wireless are simultaneously
connected.
• Network Status
•
Legal Notice
• ESN
NETWORK
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
If you already set
the Network Setting
IP Auto Setting
IP Manual Setting
Insert the IP address.
IP Mode 0'16+1".
• IP Address Ii:. 255 . 255 : 0, Q•
• Subnet Mask ~~~~~~
• Gateway ~
Networ~ Setting
r-'~- Th~~'- feature requires an~~wa~:~on -,
I
I, broadband internet connection.
jf You do not need to connect to a PC
to use this function.
• If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
Ef If the Network Setting is not com-
pleted, network may not operate nor-
mally.
JII IP Auto Setting: Select it if there is a
DHCP server on the local area net-
work (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you're using a broad-
band router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server func-
tion. The IP address will automatically
be determined.
• IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manu-
ally.
• Subnet Mask 'I~
• Gateway gJ
'ONSSeNer\ L ~~~~~~
...
• ,rt'
..
Network connecting
Select NETWORK.
~=xr2J) Select Netwo,k Setting.
@ Select Wked
If you already set Network Setting:
@ Select Resetting. The new connection
Q settings resets the current network
settings.
18