LG 55LE5400 - Page 23

AD-hoc Mode
This is the method of communicating directly with the machine to communicate without AP.
This is the same as connecting two pes with a cross cable.
Selecting th&'wirefess network setlifl9 type ,
Select the wireless network setting type.
Setting Ad-licic iietworx.
Insert the setting information into the device.
Connecting the Ad-hoc network
000
o •
00-
Setting Ad-hoc ne,!Work,
Cancel
o Example of the PC setting that
supports a wireless network
1. Find a wireless network device in
your PC.
2. Select LGTVlO that appears in
the list. (Select the same name
as the network ID that appears
on your TV screen.)
3. Type 1111111111 in the Inserting
the security key dialog.
(Type the securitY.- key that
appears on your TV screen.)
@Nellt
• C.neer
#H
'. Network Setting,
o PC Setting
Internet Protocol(TCP/IP) of PC needs to be set
manually.
IP address, Subnet Mask, and default Gateway
can be set with your own discretion. .
i.e)
IP address: 192.168.0.1 / Subnet Mask:
2552552550 / default Gateway: 192.168.0.10
• TV Setting
Verify IP address and gateway of Pc.
Input Gateway address of PC to IP Address, and
IP Address of PC to Gateway, and select Enter.
i.e) IP address: 192.168.0.10 / Subnet Mask:
2552552550 / default Gateway: 192.168.0.1
Insert the IP address.
IP Mode ~!~;;!!
• IP Address ,.ff-hH11"H
• Subnot Mask k 2!ili. 25!i .256'.0
• Gateway ~~,."t •. O. 1
• DNS Server
Featur!s using exiting networtCin be unavailable. 00 you
want to change network connection?
@ Next
Mac Address: 00:00:13:64:23:01
IP Address : 10.19.152.115
Subnel Mask: 255.255.254.0
Gateway : 10.19.152.1
Setting Ad-hoc network
Networt S,atus
Network setting is completed.
Select Close.
Insert the IP address.
e@) Select En'.,.
Select Connect to connect Ad-hoc network.
You can see the Network ID and Security Key
on your TV screen.
Enter this Network ID and Security Key to
your device.
If a network may not operate, change the
setting information using the RED button.
, Repeat step 1-3 on P21.
23