ENG
ENGLISH
• Take care not to touch the ventilation openings when watching the TV for long periods
as the ventilation openings may become hot. This does not affect the operation or
performance of the product.
• Periodically examine the cord of your appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
• Prevent dust collecting on the power plug pins or outlet.
This may cause a re hazard.
• Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the appliance.
• Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
• Avoid touching the screen or holding your nger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
• When cleaning the product and its components, unplug the power rst and wipe it with
a soft cloth. Applying excessive force may cause scratches or discolouration. Do not
spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial
shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its
panel.
Otherwise, this may result in re, electric shock or product damage (deformation,
corrosion or breakage).
• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC
power source even if you turn off this unit by SWITCH.
• When unplugging the cable, grab the plug and unplug it.
If the wires inside the power cable are disconnected, this may cause re.
• When moving the product, make sure you turn the power off rst. Then, unplug the
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a re hazard or cause
electric shock.
• When moving or unpacking the product, work in pairs because the product is heavy.
Otherwise, this may result in injury.
SAFETY INSTRUCTIONS
8
To Next Page
Loading...
