17
INSTALLATION MENU
ENGLISH
Use Default
-
If you want to use default password(this password was generated randomly), you must select ‘Enable’ in this item.
Security Key
-
When guests want to use TV’s SoftAP function, they need this password. If you want to change this default password, you
need to Change ‘Use Default’ value into ‘Disable’.
Wi-Fi Signal Strength
-
You can control wireless signal strength on SoftAP mode. This is controlled by 5 step. If you select ‘Not Used’, wireless signal
strength will be set to Max value.
Wi-Fi Channel
-
You can control wireless channel on SoftAP mode. This is controlled from 1 to 11 channel. If you select ‘Auto’, wireless
channel of SoftAP will be set to random channel.
To Next Page
Loading...
