LG 55UH850V - Connections; External Device Connection Guidelines

18
ENGLISH
tWhen installing the wall mounting bracket,
it is recommended to cover the stand hole
using tape, in order to prevent the inux of
dust and insects. (Depending on model)
Stand hole
tWhen attaching a wall mounting bracket
to the TV, insert the wall mount spacers
into the TV wall mount holes to adjust the
vertical angle of the TV. (Only when the
item of the following form is provided)
Provided
Item
Wall Mount
Spacer
tDepending on the shape of the stand, use
a at tool to remove the stand cover as
illustrated below. (e.g., a at screwdriver)
(Only when the item of the following form
is provided)
Flat tool
Connections
(notications)
Connect various external devices to the TV and
switch input modes to select an external device.
For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
NOTE
tThe external device connection may dier
from the model.
tConnect external devices to the TV
regardless of the order of the TV port.
tIf you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
tRefer to the external equipment’s manual
for operating instructions.
tIf you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
tIn PC mode, there may be noise associated
with the resolution, vertical pattern,
contrast or brightness. If noise is present,
change the PC output to another resolution,
change the refresh rate to another rate or
adjust the brightness and contrast on the
PICTURE menu until the picture is clear.