Established
date
Standard Repair Process Detail Technical Manual
Revised
date
A2
Error symptom
Content
Check White Balance value
A. Video error_No video/Normal audio
A2
Entry method
1. Press the ADJ button on the remote controller for adjustment.
2. Enter into White Balance of item 6.
3. After recording the R, G, B (GAIN, Cut) value of Color Temp
(Cool/Medium/Warm), re-enter the value after replacing the MAIN BOARD.
<ALL MODELS>
Copyright ⓒ 2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes
To Next Page
Loading...
