- 24 -
LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
5.8. HDMI ARC Function Inspection
5.8.1. Test equipment
- Optic Receiver Speaker
- MSHG-600 (SW: 1220 ↑)
- HDMI Cable (for 1.4 version)
5.8.2. Test method
(1) Insert the HDMI Cable to the HDMI ARC port from the
master equipment (HDMI1)
(2) Check the sound from the TV Set
(3) Check the Sound from the Speaker or using AV & Optic
TEST program (It’s connected to MSHG-600)
5.9. UHD 4K Test
5.9.1. Video Inspection(UDG-4004NS)
1) Insert the HDMI Cable to TV Set.
2) Convert to HDMI Mode using TV/AV Key on ADJ remote
controller
3) Inspect the sound and picture operation well.
(Color condition, Picture noise, Sound distortion etc.)
4) Inspection 2D → 3D conversion
5.9.2. Pattern Inspection (MSPG-7100)
1) Insert the HDMI Jack to HDMI 3 Port.
2) Convert to UHD Inspection Pattern. (Use remote controller)
3) Check Video and Sound.
4) Convert to 64 Gray Inspection Pattern. (Refer to Pictures)
5) Check Video and Sound.
6) Inspect HDMI-CEC function. (Push Play & Pause button)
5.9.3. 4K Inspection.(HEVC Inspection model only)
1) Insert USB that 4K video file is saved.
2) Check that the video plays normally.
5.10. Ship-out mode check (In-stop)
▪ After final inspection, press In-Stop key of the Adj. R/C and
check that the unit goes to Stand-by mode.
To Next Page
Loading...
