7
• For an optimal connection, HDMI cables
and USB devices should have bezels less
than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the
USB cable or USB memory stick does not t
into your TV’s USB port.
A
B
A
B
*A
10 mm
*B
18 mm
• Use a certied cable with the HDMI logo
attached.
• If you do not use a certied HDMI cable,
the screen may not display or a connection
error may occur. (Recommended HDMI Cable
Types)
- High-Speed HDMI
®
/
TM
cable (3 m or less)
- High-Speed HDMI
®
/
TM
cable with
Ethernet (3 m or less)
• How to use the ferrite core (Depending on
model)
- Use the ferrite core to reduce the
electromagnetic interference in the
power cord. Wind the power cord on the
ferrite core once.
[Wall side]
[TV side]
10 cm (+ / -2 cm)
• Do not use any unapproved items
to ensure the safety and product life
span.
• Any damage or injuries caused by
using unapproved items are not
covered by the warranty.
• Some models have a thin lm
attached on to the screen and this
must not be removed.
• When attaching the stand to the TV
set, place the screen facing down on
a cushioned table or at surface to
protect the screen from scratches.
• Make sure that the screws are
inserted correctly and fastened
securely. (If they are not fastened
securely enough, the TV may tilt
forward after being installed.) Do
not use too much force and over
tighten the screws; otherwise screw
may be damaged and not tighten
correctly.
• Make sure to wring any excess water
or cleaner from the cloth.
• Do not spray water or cleaner
directly onto the TV screen.
• Make sure to spray just enough of
water or cleaner onto a dry cloth to
wipe the screen.
• When cleaning the product, be
careful not to allow any liquid or
foreign objects to enter the gap
between the upper, left or right side
of the panel and the guide panel.
(Depending on model)
To Next Page
Loading...
