30
ENGLISH
9 Tint (Command: k j)
► To adjust the screen tint.
You can also adjust tint in the picture settings.
Transmission
(k)(j)( )(Set ID)( )(Data)(Cr)
Data Red: 00 to Green: 64
* Refer to “Real data mapping”.
Ack
(j)( )(Set ID)( )(OK/NG)(Data)(x)
10
Sharpness (Command: k k)
► To adjust the screen sharpness.
You can also adjust sharpness in the picture
settings.
Transmission
(k)(k)( )(Set ID)( )(Data)(Cr)
Data Min: 00 to Max: 32
* Refer to “Real data mapping”.
Ack
(k)( )(Set ID)( )(OK/NG)(Data)(x)
11
OSD Select (Command: k l)
► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission
(k)(l)( )(Set ID)( )(Data)(Cr)
Data 00: Off
Data 01: On
Ack
(l)( )(Set ID)( )(OK/NG)(Data)(x)
12
Remote Control Lock Mode (Command: k m)
► To lock the front panel controls on the monitor and
remote control.
Transmission
(k)(m)( )(Set ID)( )(Data)(Cr)
Data 00: Off
Data 01: On
Ack
(m)( )(Set ID)( )(OK/NG)(Data)(x)
* If you are not using the remote control, use this
mode. When main power is on/off, external control
lock is released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
13
Balance (Command: k t)
► To adjust balance.
You can also adjust balance in the audio settings.
Transmission
(k)(t)( )(Set ID)( )(Data)(Cr)
Data L: 00 to R: 64
* Refer to “Real data mapping”.
Ack
(t)( )(Set ID)( )(OK/NG)(Data)(x)
14
Color Temperature (Command: x u)
► To adjust Color Temperature. You can also adjust
Color Temperature in the picture settings.
Transmission
(x)(u)( )(Set ID)( )(Data)(Cr)
Data Warm: 00 to Cool:64
* Refer to “Real data mapping”.
Ack
(u)( )(Set ID)( )(OK/NG)(Data)(x)
To Next Page
Loading...
