LG 65UW660H - Page 24

24
ENGLISH
16. Key (Command: m c)
• To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - page 17.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
17. Control Backlight, Control Panel Light
(Command: m g)
* For LCD TV / LED TV
• To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
18. Input select (Command: x b)
(Main Picture Input)
• To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV 01: CADTV
11: CATV 10: ATV
20: AV or AV1 21: AV2
40: Component1 41: Component2
60: RGB
90: HDMI1 91: HDMI2
92: HDMI3 93: HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
19. 3D (Command: x t) (only 3D models)
(Depending upon model)
• To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ]
[Data 01] [ ][Data 02][ ][Data 03][Cr]
* (Depending upon model)
Data Structure
[Data 00] 00: 3D On
01: 3D Off
02: 3D to 2D
03: 2D to 3D
[Data 01] 00: Top and Bottom
01: Side by Side
02: Check Board
03: Frame Sequential
04: Column interleaving
05: Row interleaving
[Data 02] 00: Right to Left
01: Left to Right
[Data 03] 3D Effect(3D Depth): Min: 00 - Max:
14 (*transmit by Hexadecimal code)
* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03 (2D to 3D), [Data 01] and [Data
02] have no meaning.
* If [Data 00] is 00 (3D On) or03 (2D to 3D), [Data
03]works when 3D Mode (Genre) is manual only.
* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.
[Data 00] [Data 01] [Data 02] [Data 03]
00 O O O
01 X X X
02 X X X
03 X O O
X: don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x] [t][ ][Set ID][ ][NG][Data00][x]