To Next PageTo Next Page
Need help?Do you have a question about the LG 86TR3DK-B and is the answer not in the manual?
General| HDCP | Yes |
|---|---|
| HDCP version | 2.2 |
| HDMI ports quantity | 3 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
| Bluetooth version | 5.0 |
| Top Wi-Fi standard | Wi-Fi 6 (802.11ax) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Color gamut | 72 % |
| Working area | - mm |
| Response time | 8 ms |
| Display diagonal | 86 \ |
| Display brightness | 390 cd/m² |
| Maximum refresh rate | 60 Hz |
| Contrast ratio (dynamic) | 50000:1 |
| Contrast ratio (typical) | 1200:1 |
| Number of simultaneous touchpoints | 40 |
| Package depth | 1283 mm |
| Package width | 2110 mm |
| Package height | 225 mm |
| Package weight | 75900 g |
| Product color | Black |
| Panel mounting interface | 800 x 600 mm |
| Mean time between failures (MTBF) | 50000 h |
| Speaker power | 15 W |
| RAM capacity | 32 GB |
| Graphics card | Mali-G52 MP2 |
| Operating system installed | Android 11 |
| Aspect ratio | 16:9 |
| Built-in projector | No |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Sustainability certificates | ENERGY STAR |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 580 W |
| Power consumption (off) | 0.5 W |
| Power consumption (typical) | 385 W |
Weight and Dimensions| Depth | 1160 mm |
|---|---|
| Width | 1957 mm |
| Height | 100 mm |
| Weight | 58600 g |
Details on the electronic blackboard, touch pen, remote control, and other provided components.
Information on optional components like wall mounts and stands that are sold separately.
Instructions for mounting the electronic blackboard onto a wall.
Steps for connecting the power cable and turning the product on.
Identification and explanation of the front, back, and side components of the display.
Details on front, side, and bottom cable terminals for connecting external devices.
Guide to the functions, storage, and tip replacement of the touch pen.
Warranty voidance due to use in excessively dusty environments.
Explanation of afterimage phenomenon and recommendations for prevention.
Guidelines to prevent afterimages by changing screen content and intervals.
Specifications related to the touch screen, including OS support and spacing.
Details on audio output, sensitivity, and impedance for speaker-supporting models.
Details on supported resolutions, frequencies, and modes like VGA, USB Type-C, and HDMI/OPS.
