LG 99G - Osd Adjust

A11
OSD Adjust Description
Pin balance (Side pincushion balance)
Parallelogram
Top Corner
Bottom Corner
GEOMETRY
ENTER: SEL:
OSD ETC
68.6kHz/85Hz
SEL:
OSD ETC
PINCUSHION
ENTER: SEL:
68.6kHz/85Hz
EN
SEL:
OSD ETC
MIN MAX
PINCUSHION
EXIT: ADJ:
EN
To correct the balance of both sides bowing.
This control adjusts for a skewing of the
screen image.
To correct the irregular distortion of the
displayed image.
To correct the irregular distortion of the
displayed image.
Select the Recall screen to reset Side
Pincushion Balance, Parallelogram, Top
Corner and Bottom Corner to their original
factory preset settings.
If the monitor is operating in a user mode,
this control has no effect.
Recall
(side) Pincushion
Trapezoid
To correct the bowing in and out of the image.
To correct geometric distortion.