LG AC18BH.NSK - Page 26

26
Using the Low Heating Function
This function operates the heating system
to maintain a minimum room temperature
and prevent objects in the room from
freezing where there is no permanent
resident, such as a vacation.
•
, are displayed on the display
screen.
NOTE
• This function is available with Heating
Mode.
• During LH operation, when you press
buttons such as
, , Mode, Fan
Speed, and then return to Heating Mode.
• If Jet Mode button is pressed during
LH operation, this function is disabled
and Power Heating Mode is operated
immediately. (only for power heating
model)
• In case an error occurred, operation can
be interrupted for the protection of the
product.
• Comfort Air and
Swing
button cannot
be used while the LH function is in
operation.
Using the Mosquito Away
Function
This function fans away mosquitos by
generating a high-frequency wave.
•
is displayed on the display screen.
NOTE
• You can use this function without turning
the air conditioner on.
•
is displayed on some indoor units.
Using the Auto Clean Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor
unit. This function removes such moisture.
•
is displayed on the display screen.
NOTE
• Some functions cannot be used while the
Auto Clean function is in operation.
• When UVnano Function is set, Auto
Clean Function works together.
• If you turn off the unit, the fan continues
to run for 30 minutes and cleans the
inside of the indoor unit.
•
is displayed on some indoor units,
depending on the model.
Using the Comfort Sleep Function
This function operates the air conditioner
automatically to make the comfortable
sleep environment.
•
, are displayed on the display
screen.
NOTE
• This function is available with Cooling
Mode.
• The vane stops swing and sets indirect
airflow angle, after 30 minutes from
start even though the room temperature
doesn’t decrease to optimal temperature
to sleep.
• It is possible that a comfortable sleep
environment is different according to the
people.