Owner's Manual 17
Operating Instructions
ENGLISH
NEO PLASMA Air Purifying Operation only
Press the Start/Stop button.
The unit will respond with beep sound.
Open the door on the Remote
Controller. Press the PLASMA air
purifying operation ON/OFF button.
Operation will start when the button
is pressed and stop when the button
is pressed again.
Set the fan speed. You can select the fan speed in
four steps-low, medium, high or CHAOS.
Each time the button is pressed, the fan speed
mode is shifted.
ā Air purifying operation (NEO PLASMA) can be
with cooling, Heating or any other operations.
1
2
3
NEO PLASMA Purification Operation(Optional)
If you press the only PLASMA button, only
PLASMA purification function operates.
Then, fan speed is low. You can select the fan
speed in four steps-low, medium, high or CHAOS.
Each time the button ( ) is pressed, the fan
speed mode is shifted.
To Next Page
Loading...
Need help?
General
