LG Art Cool PREMIER - Basic Functions; Cooling Operation; Air Circulation Operation; Adjusting the Fan Speed

12 | INTRODUCTION
Single Zone Art Cool Premier Owner’s Manual
Due to our policy of continuous product innovation, some specications may change without notication.
BASIC FUNCTIONS
Cooling Operation -
Adjusting the Air Flow (Swing) Direction
Cooling Operation
1. On the Remote Control, press to turn on the power to the
indoor unit.
2. Press repeatedly until the cooling symbol (snowflake)
is displayed on the Remote Control display screen.
3. Press the up and down arrow buttons to increase
or decrease currently displayed temperature.
The temperature range for cooling is: 64.4 °F (18 °C) - 86 °F (30 °C).
Heating Operation
1. On the Remote Control, press to turn on the power to the
indoor unit.
2. Press repeatedly until the heating symbol (sun) is
displayed on the Remote Control display screen.
3. Press the up and down arrow buttons
to increase or decrease the currently displayed temperature.
• The temperature range for heating is: 60.8 °F (16 °C) - 86 °F
(30 °C).
• Cooling-only models do not support this function.
Dehumidifying Operation
This mode removes excess moisture from an environment with high
humidity or during local rainy seasons, in order to prevent mold
from setting in. This mode adjusts the room temperature and the fan
speed automatically to maintain the optimal level of humidity.
1. On the Remote Control, press to turn on the power to the
indoor unit.
2. Press repeatedly until the dehumidifying symbol (raindrop)
is displayed on the Remote Control display screen.
• When indoor unit is in Dehumidifying Mode, you cannot adjust the
room temperature. Temperature is being adjusted automatically.
• While in Dehumidifying Mode, display screen will not show the tem-
perature value.
Air Circulation Operation
This mode only circulates the indoor air without changing the room
temperature.
The cooling lamp lights up in air circulation mode on the indoor unit.
1. On the Remote Control, press to turn on the power to the
indoor unit.
2. Press to activate the air circulation operation.
will be displayed on the Remote Control display screen.
3. Press to adjust the fan speed.
Adjusting the Fan Speed
1. Press repeatedly to adjust the fan speed. See Table 3
below for the various speed adjustments.
2. Select if you want natural air. The fan speed adjusts auto-
matically.
Table 3: Fan Speed Levels
Adjusting the Air Flow (Swing)
Direction
1. Toadjustthedirectionoftheairowvertically,press
repeatedly and select the desired position.
2. Select on the Remote Control display screen, to adjust the
desired vertical position automatically.
3. To adjust the direction of the air flow horizontally, press
repeatedly and select the desired position.
4. Select on the Remote Control display screen, to adjust
the desired horizontal position automatically.
• Some Single Zone Inverter Wall Mounted models may not support
air flow direction. Check your model to be sure that it is an option.
• When restarting the air conditioner, it will remember the previously
set direction of air flow. As a result, the air deflector may not accu-
rately reect the icon displayed on the Remote Control. If this occurs,
press or to adjust the direction of the air ow once more.
Remark Speed
High
Medium - High
Medium
Medium - Low
Low
Natural Wind