LG AUUC306A - Wired LCD Remote Control Operation

20 Universal System Air Conditioner
Function of Remote Control
5. Wired LCD Remote Control(Ceiling Concealed Duct models)
RESET
Timer Cancel
Program Week Holiday
SET/CLR
MinHour
JET
AUTO
Humidify
ZONE
1234
AUTO SWING OPERATION FAN SPEED
Program set
SUB FUNCTION SET TEMP
Room Temp
HI
MED
LO
Heater
Defrost
Filter
Preheat
Out door
Timer
On
Set no. Time
Off
01 03 05 07 09 11 13 15 17 19 21 23
Time
Operation unit
3
8
5
9
10
11
12
13
14
2
1
6
4
7
16
15
Signal receptor
1 Operation display
Displays the operation conditions.
2 On/Off Button
Operation starts when this button is pressed, and
stops when the button is pressed again.
3 Set Temperature Button
Used to set the temperature when the desired tem-
perature is obtained.
4 FAN Operation Button
Used to circulate room air without cooling or heat-
ing.
5 Electric Heater Button(optional)
Used to set the Electric Heater.
6 Fan Speed Button
Used to set desired fan speed.
7 Operation Mode Selection Button
Used to select the operation mode.
• Auto Operation Mode.
• Cooling Operation Mode.
• Soft Dry Operation Mode.
• Heating Operation Mode.(except cooling model)
8 Timer Cancel Button
Used to cancel the timer.
9 Timer Set Button
Used to set the timer when the desired time is
obtained.
10 Week Button
Used to set the day of the week.
11 Program Button
Used to set the weekly timer.
12 Holiday Button
Used to set a holiday of the week.
13 Time Setting Button
Used to set the time of the day and change the time
in the weekly timer Function.
14 Set and Clear Button
Used to set and clear the weekly timer.
15 Room Temperature Checking Button
Used to check the room temperature.
16 Reset Button
Used to set the current time and clear the setting
time.