Installation
Service Manual 63
• Install the unit leaning to drainage hole side as a
figure for easy water drainage.
• A place where the unit will be leveled and can
support the weight of the unit.
• A place where the unit can withstand its vibration.
• A place where service can be easily performed.
• Select and mark the position for fixing bolts.
• Drill the hole to set anchor on the face of ceiling.
• Insert the set anchor and washer onto the
suspension bolts for locking the suspension bolts
on the ceiling.
• Mount the suspension bolts to the set anchor
firmly.
• Secure the installation plates onto the suspension
bolts (adjust level roughly) using nuts, washers
and spring washers.
CASE 2
POSITION OF CONSOLE BOLT
To Next Page
Loading...