- 142 -
Copyright ©2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4. Trouble Shooting 
Items Contents
Purpose
Prevention of damage or wrong control of PCBA (PSCM/PFCM,IPM) 
caused by heat sink temperature detection error
Condition for Generation
Detected temperature is Ŧ -40ఁ or ŧ 200ఁ.
Items for checking Sub-items for checking
Working Temperature Outdoor Temperature
Replacing PCB
Environmental factor checking method
5IFQSPEVDUTXPSLTXIFOPVUEPPSUFNQFSBUVSFJTⴍⳄ
(FOFSBUJPOPG$)DBTFNJOVUFTBGUFSUIFPQFSBUJPOPGUIFQSPEVDU
*GCPUIPGBCPWFTUBUFEDPOEJUJPOTBSFTBUJTGJFEFOWJSPONFOUBMGBDUPSJTUIFDBVTF
Sensor checking method
1PXFS0GG
.FBTVSFUIFSFTJTUBODFVTJOHBUFTUFS
.FBTVSFUIFSFTJTUBODF)FBUTJOL5FNQQPJOU3FGFSUPUIFOFYUQBHF
CBTFEPOⳄ,ⳊⰍ
Ⲽ3FGFSUPQBHF
6.7 Troubleshooting Outdoor Error 
CH 65 (Heat sink Temperature Sensor Open/Short)