To Next PageTo Next Page
Need help?Do you have a question about the LG DLE2515S and is the answer not in the manual?
General| Appliance Category | Dryer |
|---|---|
| Type | Electric |
| Capacity | 7.4 cu. ft. |
| Weight | 120 lbs |
| Energy Star Certified | No |
| Steam Technology | No |
| Wi-Fi Connectivity | No |
| Width | 27 inches |
| Wrinkle Care Option | Yes |
| Drum Light | Yes |
| Color | White |
Instructions for correctly reconnecting grounding devices after service.
Steps to take if a gas leak is detected, emphasizing safety and evacuation.
Guidelines to prevent damage from static electricity to electronic components during repair.
Information on available accessories such as dryer racks and stacking kits.
Step-by-step guide for installing the dryer rack inside the drum.
Instructions for securely installing a stacking kit to mount the dryer on a washing machine.
Guide for installing the dryer on an optional pedestal base.
Covers 4-wire receptacles, direct wiring, and power cord connection.
Covers 3-wire receptacles, direct wiring, and power cord connection.
Alternative 3-wire connection method for specific codes.
Diagram showing the layout of the Printed Wiring Board assembly.
Table correlating dryer models with their diagnostic display settings.
Detailed schematic of the Printed Wiring Board assembly components.
Electrical schematic for electric dryer models.
Electrical schematic for gas dryer models.
Steps to enter and activate the dryer's diagnostic test mode.
Procedure to test the 120VAC electrical supply to the dryer's controller.
Method to measure thermistor resistance to check temperature sensing functionality.
Procedure to test motor resistance for rotation and fan function.
Steps to test the moisture sensor's accuracy and response to dryness levels.
Procedure to test the door switch for proper sensing of door open/closed states.
Method to test the heater switch and associated thermostats in electric models.
Procedure to test gas valve operation and voltage in gas dryer models.
Procedures for adjusting gas valve settings and changing orifices.
Diagrams and charts illustrating gas valve operation and ignition sequence.
Steps for removing the top plate, control panel, and cabinet cover.
Procedures for removing drum assembly, motor, lamp, and exhaust systems.
Steps for removing air ducts and rollers.
Exploded diagram of the control panel and associated mounting plate.
Exploded diagram showing the cabinet structure and door components.
Exploded diagrams of drum and motor assemblies for electric and gas models.
