LG DLE3090 Series User Manual

22 INSTALLATION
NOTE
• In the Commonwealth of Massachusetts: This
product must be installed by a licensed plumber
or as fitter. hen sin alltpe as sht off
valves the shall e handletpe.  eile as
connector, when used, must not exceed 3 feet.
his drer is confired from the factor for natral
gas (NG). If the dryer is to be used with propane
 as it mst e converted  a alified service
technician.
1
Make sure that the gas supply to the laundry
room is turned OFF and the dryer is unplugged.
onfirm that the tpe of as availale in or
laundry room is appropriate for the dryer.
2
emove the shippin cap from the as fittin at
the back of the dryer. Be careful not to damage
the threads of the gas connector when removing
the shipping cap.
3
Connect the dryer to your laundry room’s gas
sppl sin a ne eile stainless steel
connector ith a inch  fittin.
NOTE
• DO NOT use old connectors.
4
Securely tighten all connections between the
dryer and your laundry room’s gas supply.
5
Turn on your laundry room’s gas supply.
6
Check all pipe connections (both internal and
external) for gas leaks with a noncorrosive leak-
detection id.
7
Proceed to Venting the Dryer.
3/8" NPT gas
Connection
ertified
Stainless Steel Flexible
Connector
Gas Supply Shutoff
Valve
1/8" NPT Pipe Plug
High-Altitude Installations
he  ratin of this drer is certified for
elevations below 10,000 feet.
If your gas dryer is being installed at an elevation
aove  feet it mst e derated  a alified
technician or gas supplier.

LG DLE3090 Series Specifications

General

Brand	LG
Model	DLE3090 Series
Category	Dryer
Language	English