32
NOTE
To protect your garments not every dryness level,
temperature, or option is available with every cycle.
See the $ZDMF(VJEF for details.
HOW TO USE
Cycle Guide
Sensor dry cycles
Sensor dry cycles utilize LG’s unique dual sensor
system to detect and compare the moisture level
in clothes and in the air and adjust the drying time
as needed to ensure superior results. The dryer
automatically sets the dryness level and temperature
at the recommended setting for each cycle. The
estimated time remaining will be shown in the display.
Manual dry cycles
Use manual dry cycles to select a specific amount of
drying time and a drying temperature. When a manual
dry cycle is selected, the Estimated Time Remainng
display shows the actual time remaining in your cycle.
You can change the actual time in the cycle by pressing
More Time or Less Time.
$ZDMF 'BCSJD5ZQF
%SZ
-FWFM
5FNQFSBUVSF
5JNF
JO.JO
.PSF
5JNF
-FTT5JNF
8SJOLMF
Care
%BNQ%SZ
4JHOBM
Anti
#BDUFSJBM
&OFSHZ
4BWFS
#VMLZ
Large
Comforters, pillows,
shirts
NORMAL
MEDIUM
"%+645"#-&
Perm.
Press
Permanent press,
synthetic items
NORMAL
LOW
ÅÅ
"%+645"#-&
Cotton/
Normal
Work clothes,
corduroys, etc.
NORMAL
MEDIUM
&MFD
(BT
ÅÅÅÅ
"%+645"#-&
Delicates
Lingerie, sheets,
blouses
NORMAL
LOW
ÅÅ
"%+645"#-&
Speed
Dry
For small loads with
short drying times
OFF
)*()
ÅÅ
"%+645"#-& "%+645"#-&
Air Dry
For items that
require heat-free
drying such as
plastics or foam
filled items
OFF /0)&"5
ÅÅ
"%+645"#-&
Freshen
Up
For removing light
wrinkles from
clothing
OFF
.*%)*()
ÅÅ
"%+645"#-& "%+645"#-&
NOTE
The Energy Saver option is turned on by default in the
Cotton/Normal cycle.
If you want faster drying than the Cotton/Normal
default setting, you can turn off the Energy Saver
option.
= default setting
Å
= allowable option