LG DLEX3250 Series - Page 27

27
ENGLISH
INSTALLATION INSTRUCTIONS
Connecting electric dryers (cont.)
USA only
Three-wire connection for electric dryers: Direct wire







the three wires into a hook shape.

the dryer. Install a UL-listed strain relief into the power cord

through the strain relief.
 conductor
cable.

reinstallation of the dryer.
3. Attach the two hot leads of the power cord to the outer
terminal block screws. Attach the neutral wire to the center
terminal block screw. Connect the external ground (if required
by local codes) to the green ground screw. 
. Reinstall the terminal block access cover.

UL-Listed
Strain Relief
UL-Listed
3-Wire Power
Cord
Terminal

Ground
Screw
Neutral
(White)
Hot

Hot
(Red)
External Ground
Wire (If required
by local codes)
White Wire
from Dryer
harness
w
WARNING









